Mower |
|
---|---|
Cutting Width | 4800 - 48"; 5400 - 54" |
Cutting Height | 2" – 5" In 1/4" Increments |
Blades | 4800 - 1/4" x 2 1/2" x 16 1/2", High Lift, Heat Treated 5400 - 1/4" x 2 1/2" x 18 3/4", High Lift, Heat Treated |
Lift and Height Adjustment | Manual Quick-Adjust Setting with Hand Lever |
Blade Belt | Single V-Belt Spring Tension |
Anti-Scalp Rollers | 5400 - 6 Total (4 Double-Bracketed Front Wheels, 2 Rear Wheels) |
Deck Flotation | Floats On Four 1/4" Deck Hangers |
Deck Thickness | 3/16" Thick Solid Steel With Additonal 1/4" Steel Leading Edge And 3/8" Side Trim |
Engine |
|
Gross Horsepower/CC | 726cc (23.5hp) Kawasaki® FX |
Cylinders | 90 Degree V-Twin |
Displacement | 726 cc; 726 cc |
Maximum Torque | 39.9 ft. lbs. 2,400 RPM |
Fuel Requirement | Unleaded Gasoline (87 Octane or higher) |
Fuel Capacity | 6.5 Gallons |
Fuel Filter | Replaceable Automotive Type |
Cooling System | Air-Cooled |
Ignition | Electronic |
Starter | 12 Volt |
Charging System | 20 Amp |
Drive System |
|
Transmission | Industrial Grade Dual Integrated Hydrostatic Transaxle |
Pump Drive | Integrated Axial Piston Pump & Motor w/Planetary Gear Reduction |
Wheel Drive | Hydro-Gear® Integrated 3400 Series Transaxle |
Hydrostatic System Oil | 20W50 Motor Oil |
Hydraulic Filter | Internal, Replaceable, 1 Per Axle |
Pumps | - |
Hydraulic Coolers | 8" 3,600rpm Cooling Fan; One Per Unit.; 8" 3,600RPM Cooling Fan; One Per Unit |
Dimensions |
|
Weight | 4800 - 905 lbs.; |
Overall Height | 48" |
Overall Width Chute Up/Chute Down | 4800 - 50 1/2"/62 1/2"; 5400 - 56 1/2" / 68 1/2" |
Overall Length | 63" |
Tire to Tire Width | 4800 - 43 1/2"; 5400 - 43 1/2" |
Tires - Front | 13 x 6.5 – 6 Smooth Tread |
Tires - Rear | 23 x 9 - 12 Reaper Tires |
Steering | Dual Lever Steering, Independent Control |
Turning Radius | Zero Turn - Zero Degrees, Turns Within Unit Length |
Ground Speed (forward) | Up To 10 mph |
Parking Brake | Internal Parking Brake |